Eisenbahn Pilsen-Priesen(-Komotau) /Austrian Stat 0-6-0 Locomotives in Austria
Class Details by Steve Llanso of Sweat House Media
Class 35 / 39 (Locobase 4618)
Data from [
], accessed 20 August 2006.
Although the EPPK took delivery of these freight engines in 1876, the specifications reflect the 1892 rebuilding. The boiler came in two versions; the one not shown in the data had 186 tubes, 132 sq m (1,420 sq ft) of total heating surface, and 8 sq m (86.08 sq ft) of firebox heating surface.
Three were left to take a CSD class ID of 322.0, but operated for the Czech National Railway until 1928.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 35 / 39 |
| Locobase ID | 4618 |
| Railroad | Eisenbahn Pilsen-Priesen(-Komotau) /Austrian State |
| Country | Austria |
| Whyte | 0-6-0 |
| Number in Class | 4 |
| Road Numbers | 35-38 |
| Gauge | Std |
| Number Built | |
| Builder | Floridsdorf |
| Year | 1892 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 10.01 / 3.05 |
| Engine Wheelbase (ft / m) | 10.01 / 3.05 |
| Ratio of driving wheelbase to overall engine wheelbase | 1 |
| Overall Wheelbase (engine & tender) (ft / m) | 34.06 / 10.38 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 77,162 / 35,000 |
| Engine Weight (lbs / kg) | 77,162 / 35,000 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 43 / 21.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 49.80 / 1266 |
| Boiler Pressure (psi / kPa) | 145 / 1000 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 17.91" x 24.88" / 455x630 |
| Tractive Effort (lbs / kg) | 19,751 / 8958.91 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.91 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | |
| Firebox Area (sq ft / m2) | 89.31 / 8.30 |
| Grate Area (sq ft / m2) | 19.48 / 1.81 |
| Evaporative Heating Surface (sq ft / m2) | 1440 / 133.80 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1440 / 133.80 |
| Evaporative Heating Surface/Cylinder Volume | 198.49 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 2825 |
| Same as above plus superheater percentage | 2825 |
| Same as above but substitute firebox area for grate area | 12,950 |
| Power L1 | 3130 |
| Power MT | 268.28 |