Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 30, p. 238 and Volume 31, p. 217. Works numbers were 31024-31025 in June 1907 and 32794-32795 in May 1908.
Small metre-gauge Consolidations supplied to Norton Megaw were put to work on this southern Brazilian railroad. The 1908 engines were apparently ordered by the Parana itself.
Principal Dimensions by Steve Llanso of Sweat House Media | |
|---|---|
| Class | 19 |
| Locobase ID | 13141 |
| Railroad | Parana |
| Country | Brazil |
| Whyte | 2-8-0 |
| Number in Class | 2 |
| Road Numbers | 19-20, 9-10 |
| Gauge | Metre |
| Number Built | 2 |
| Builder | Burnham, Williams & Co |
| Year | 1907 |
| Valve Gear | Walschaert |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 11.50 / 3.51 |
| Engine Wheelbase (ft / m) | 18 / 5.49 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.64 |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 60,000 / 27,216 |
| Engine Weight (lbs / kg) | 70,000 / 31,752 |
| Tender Loaded Weight (lbs / kg) | 38,000 / 17,237 |
| Total Engine and Tender Weight (lbs / kg) | 108,000 / 48,989 |
| Tender Water Capacity (gals / ML) | 1800 / 6.82 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 25 / 12.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 36 / 914 |
| Boiler Pressure (psi / kPa) | 130 / 11 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 16" x 20" / 406x508 |
| Tractive Effort (lbs / kg) | 15,716 / 7128.67 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.82 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 159 - 2" / 51 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 10.50 / 3.20 |
| Firebox Area (sq ft / m2) | 84.40 / 7.84 |
| Grate Area (sq ft / m2) | 16.20 / 1.51 |
| Evaporative Heating Surface (sq ft / m2) | 952 / 88.48 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 952 / 88.48 |
| Evaporative Heating Surface/Cylinder Volume | 204.55 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 2106 |
| Same as above plus superheater percentage | 2106 |
| Same as above but substitute firebox area for grate area | 10,972 |
| Power L1 | 2303 |
| Power MT | 338.48 |