Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University Volume 18, p.150,. Works number was 13186 in January 1893.
Apparently taken off the shelf to supply to a variety of railroads, this bi-directional design suited the Nova Scotia-based Acadia Coal Company's 16-mile network of lines serving the coal mines of Pictou County. The engine later was rebuilt with larger cylinders (17"/432 mm diameter) and taller drivers (50"/1,270 mm).
It remained in service through the 1940s.
Principal Dimensions by Steve Llanso of Middle Run Media | |
---|---|
Class | 10 |
Locobase ID | 12700 |
Railroad | Albion Mills |
Country | Canada |
Whyte | 2-4-2T |
Number in Class | 1 |
Road Numbers | 10 |
Gauge | Std |
Number Built | 1 |
Builder | Burnham, Williams & Co |
Year | 1904 |
Valve Gear | Stephenson |
Locomotive Length and Weight | |
Driver Wheelbase (ft / m) | 7 / 2.13 |
Engine Wheelbase (ft / m) | 22.67 / 6.91 |
Ratio of driving wheelbase to overall engine wheelbase | 0.31 |
Overall Wheelbase (engine & tender) (ft / m) | 22.67 / 6.91 |
Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
Weight on Drivers (lbs / kg) | 64,000 / 29,030 |
Engine Weight (lbs / kg) | 88,000 / 39,916 |
Tender Loaded Weight (lbs / kg) | |
Total Engine and Tender Weight (lbs / kg) | |
Tender Water Capacity (gals / ML) | 1000 / 3.79 |
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
Minimum weight of rail (calculated) (lb/yd / kg/m) | 53 / 26.50 |
Geometry Relating to Tractive Effort | |
Driver Diameter (in / mm) | 44 / 1118 |
Boiler Pressure (psi / kPa) | 160 / 1100 |
High Pressure Cylinders (dia x stroke) (in / mm) | 16" x 24" / 406x610 |
Tractive Effort (lbs / kg) | 18,991 / 8614.18 |
Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.37 |
Heating Ability | |
Tubes (number - dia) (in / mm) | 175 - 2" / 51 |
Flues (number - dia) (in / mm) | |
Flue/Tube length (ft / m) | 10.83 / 3.30 |
Firebox Area (sq ft / m2) | 77.70 / 7.22 |
Grate Area (sq ft / m2) | 14.40 / 1.34 |
Evaporative Heating Surface (sq ft / m2) | 1062 / 98.70 |
Superheating Surface (sq ft / m2) | |
Combined Heating Surface (sq ft / m2) | 1062 / 98.70 |
Evaporative Heating Surface/Cylinder Volume | 189.98 |
Computations Relating to Power Output (More Information) | |
Robert LeMassena's Power Computation | 2304 |
Same as above plus superheater percentage | 2304 |
Same as above but substitute firebox area for grate area | 12,432 |
Power L1 | 3045 |
Power MT | 209.78 |