YJ production only lasted three years, ending in 1961. Source [] Production ran from 1958-1961. The first 80 came from the Tangshan Railway Vehicle works. Jinan Railway Vehicle Equipment Company supplied 117 and two smaller works--Mudanjiang (3).and Wuchang (2)--delivered 5.
The cylinder dimension data refer to the first 80 locomotives. 201-250 were fitted with 482 mm diameter, 660 mm stroke cylinder. The last 70 used 510 mm cylinders stroking the same as the first 80. Sources state that the design derived from the JF 2-6-2 (Locobase 4824); which served as the basis for the SY 2-8-2.
Principal Dimensions by Steve Llanso of Sweat House Media | |
---|---|
Class | YJ (Yuejin/Leap Forward) |
Locobase ID | 2162 |
Railroad | China State Railways |
Country | China |
Whyte | 2-6-2 |
Number in Class | 202 |
Road Numbers | YJ 101-180, 201-321 |
Gauge | Std |
Number Built | 202 |
Builder | several |
Year | 1958 |
Valve Gear | |
Locomotive Length and Weight | |
Driver Wheelbase (ft / m) | |
Engine Wheelbase (ft / m) | |
Ratio of driving wheelbase to overall engine wheelbase | |
Overall Wheelbase (engine & tender) (ft / m) | |
Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
Weight on Drivers (lbs / kg) | 120,703 / 54,750 |
Engine Weight (lbs / kg) | 149,914 / 68,000 |
Tender Loaded Weight (lbs / kg) | |
Total Engine and Tender Weight (lbs / kg) | |
Tender Water Capacity (gals / ML) | 5016 / 19 |
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 7.70 / 7 |
Minimum weight of rail (calculated) (lb/yd / kg/m) | 67 / 33.50 |
Geometry Relating to Tractive Effort | |
Driver Diameter (in / mm) | 53.90 / 1370 |
Boiler Pressure (psi / kPa) | 185.60 / 12.80 |
High Pressure Cylinders (dia x stroke) (in / mm) | 20.87" x 27.95" / 530x710 |
Tractive Effort (lbs / kg) | 35,632 / 16162.42 |
Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.39 |
Heating Ability | |
Tubes (number - dia) (in / mm) | |
Flues (number - dia) (in / mm) | |
Flue/Tube length (ft / m) | |
Firebox Area (sq ft / m2) | |
Grate Area (sq ft / m2) | 39.83 / 3.70 |
Evaporative Heating Surface (sq ft / m2) | 2142 / 199 |
Superheating Surface (sq ft / m2) | |
Combined Heating Surface (sq ft / m2) | 2142 / 199 |
Evaporative Heating Surface/Cylinder Volume | 193.56 |
Computations Relating to Power Output (More Information) | |
Robert LeMassena's Power Computation | 7392 |
Same as above plus superheater percentage | 7392 |
Same as above but substitute firebox area for grate area | |
Power L1 | |
Power MT |