Data from DeGolyer, Vol 79, pp. 40+. Works number was 60322 in December 1927.
Like the 1922 Campbell's Creek Consolidation described in Locobase 14938 on which this locomotive clearly is based, the designation of this Cuban locomotive as destined for plantation service is misleading. Its dimensions suggest instead that it was intended to run on one of the major railroads that took the Borjita's mill output to a port. Although fitted with a saturated boiler, the 6 used 10" (254 mm) piston valves for steam distribution to the cylinders.
Principal Dimensions by Steve Llanso of Sweat House Media | |
---|---|
Class | 6 |
Locobase ID | 15416 |
Railroad | Ingenio Central Borjita |
Country | Cuba |
Whyte | 2-8-0 |
Number in Class | 1 |
Road Numbers | 6 |
Gauge | Std |
Number Built | 1 |
Builder | Baldwin |
Year | 1927 |
Valve Gear | Walschaert |
Locomotive Length and Weight | |
Driver Wheelbase (ft / m) | 14 / 4.27 |
Engine Wheelbase (ft / m) | 22.08 / 6.73 |
Ratio of driving wheelbase to overall engine wheelbase | 0.63 |
Overall Wheelbase (engine & tender) (ft / m) | 54.04 / 16.47 |
Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
Weight on Drivers (lbs / kg) | 140,690 / 63,816 |
Engine Weight (lbs / kg) | 157,870 / 71,609 |
Tender Loaded Weight (lbs / kg) | 129,000 / 58,513 |
Total Engine and Tender Weight (lbs / kg) | 286,870 / 130,122 |
Tender Water Capacity (gals / ML) | 6000 / 22.73 |
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 3000 / 11,355 |
Minimum weight of rail (calculated) (lb/yd / kg/m) | 59 / 29.50 |
Geometry Relating to Tractive Effort | |
Driver Diameter (in / mm) | 50 / 1270 |
Boiler Pressure (psi / kPa) | 200 / 13.80 |
High Pressure Cylinders (dia x stroke) (in / mm) | 20" x 24" / 508x610 |
Tractive Effort (lbs / kg) | 32,640 / 14805.27 |
Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.31 |
Heating Ability | |
Tubes (number - dia) (in / mm) | 262 - 2.25" / 57 |
Flues (number - dia) (in / mm) | |
Flue/Tube length (ft / m) | 13.33 / 4.06 |
Firebox Area (sq ft / m2) | 162 / 15.06 |
Grate Area (sq ft / m2) | 29.90 / 2.78 |
Evaporative Heating Surface (sq ft / m2) | 2200 / 204.46 |
Superheating Surface (sq ft / m2) | |
Combined Heating Surface (sq ft / m2) | 2200 / 204.46 |
Evaporative Heating Surface/Cylinder Volume | 252.10 |
Computations Relating to Power Output (More Information) | |
Robert LeMassena's Power Computation | 5980 |
Same as above plus superheater percentage | 5980 |
Same as above but substitute firebox area for grate area | 32,400 |
Power L1 | 5749 |
Power MT | 360.35 |