Data from diagram UG Type 164, Societe Alsacienne de Construction Mecaniques from SACM locomotive book supplied by Dany Machi up at [] as
Diagrammes des machines SACM construites a GRAFENSTADEN (October 2007).
Locobase couldn't place the users shown on the diagram until he encountered Jens Merte's and Dietmar's Stressow's SACM production list.
Mines de la Roche le Moliere et Firminy
RMF 16 7412
RMF 17 7477
RMF 19 7698
De Wendel steel maker, Hayange in Alsace-Lorraine
W96-W97 7399-7400
W99 7476
W100 7507
Groupe minier Amalie, Usine Dem. de Potasse (Eng: potash)
LG 6 7438
Potasses d'Alsace (1931)
Groupe Amelie "1" 7614
Groupe Fernand Arme "4" 7615
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 15588 |
| Railroad | several industrial |
| Country | France |
| Whyte | 0-8-0T |
| Number in Class | 10 |
| Road Numbers | |
| Gauge | Std |
| Number Built | 10 |
| Builder | SACM |
| Year | 1928 |
| Valve Gear | Heusinger |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 13.62 / 4.15 |
| Engine Wheelbase (ft / m) | 13.62 / 4.15 |
| Ratio of driving wheelbase to overall engine wheelbase | 1 |
| Overall Wheelbase (engine & tender) (ft / m) | 13.62 / 4.15 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 141,537 / 64,200 |
| Engine Weight (lbs / kg) | 141,537 / 64,200 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 1690 / 6.40 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 2.20 / 2 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 59 / 29.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 48.80 / 1240 |
| Boiler Pressure (psi / kPa) | 169.70 / 1170 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 20.47" x 23.62" / 520x600 |
| Tractive Effort (lbs / kg) | 29,255 / 13269.86 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.84 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 256 - 1.614" / 41 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 12.80 / 3.90 |
| Firebox Area (sq ft / m2) | 126.91 / 11.79 |
| Grate Area (sq ft / m2) | 22.17 / 2.06 |
| Evaporative Heating Surface (sq ft / m2) | 1511 / 140.39 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1511 / 140.39 |
| Evaporative Heating Surface/Cylinder Volume | 167.95 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 3762 |
| Same as above plus superheater percentage | 3762 |
| Same as above but substitute firebox area for grate area | 21,537 |
| Power L1 | 3292 |
| Power MT | 205.11 |