Data from G Humbert, Traite des Chemins de Fer d'Interet Local (Paris: Ch Beranger, 1893) , p. 263.
Locobase believes the larger diameter of the two cylinder sizes should be something like 380 mm, but Humbert's table clearly shows 280 mm. The compiler adopts 380 mm because of the more likely HP/LP ratio it yields.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 9430 |
| Railroad | CFD (Montereau a Yssingeaux) |
| Country | France |
| Whyte | 0-4-4-0T |
| Number in Class | |
| Road Numbers | |
| Gauge | Metre |
| Number Built | |
| Builder | SACM |
| Year | 1892 |
| Valve Gear | Heusinger |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 3.77 / 1.15 |
| Engine Wheelbase (ft / m) | 13.12 / 4 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.29 |
| Overall Wheelbase (engine & tender) (ft / m) | 13.12 / 4 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 54,454 / 24,700 |
| Engine Weight (lbs / kg) | 54,454 / 24,700 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | 54,454 / 24,700 |
| Tender Water Capacity (gals / ML) | |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 23 / 11.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 35.40 / 899 |
| Boiler Pressure (psi / kPa) | 169.70 / 1170 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 9.84" x 18.11" / 250x460 |
| Low Pressure Cylinders (dia x stroke) (in / mm) | 14.96" x 18.11" / 380x460 |
| Tractive Effort (lbs / kg) | 9975 / 4524.59 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 5.46 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 10.83 / 3.30 |
| Firebox Area (sq ft / m2) | 44.33 / 4.12 |
| Grate Area (sq ft / m2) | 8.18 / 0.76 |
| Evaporative Heating Surface (sq ft / m2) | 451 / 41.91 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 451 / 41.91 |
| Evaporative Heating Surface/Cylinder Volume | 282.94 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1388 |
| Same as above plus superheater percentage | 1388 |
| Same as above but substitute firebox area for grate area | 7523 |
| Power L1 | 1828 |
| Power MT | 296.03 |