Data from "Locomotive Engines at the Paris Exhibition", The Artizan, Vol II, 4th Series, #2 (11 February 1868), p. 27.
Data from W H Maw and William Dredge, "Locomotives", Reports on the Vienna Universal Exhibition, Part II (London: George Eyre and William Spottiswoode, 1874), p. 399.
Maw and Dredge describe this little saddle tank as "...requiring no special notice".
Principal Dimensions by Steve Llanso of Middle Run Media | ||
---|---|---|
Class | unknown | unknown |
Locobase ID | 11162 | 13167 |
Railroad | Contractor's engine | Contractor's engine |
Country | Great Britain | Great Britain |
Whyte | 0-4-0ST | 0-4-0ST |
Number in Class | 1 | 1 |
Road Numbers | ||
Gauge | Std | Std |
Number Built | 1 | 1 |
Builder | Hughes' Loco and Tramway | Hughes' Loco and Tramway |
Year | 1867 | 1873 |
Valve Gear | Stephenson | Stephenson |
Locomotive Length and Weight | ||
Driver Wheelbase (ft / m) | 5.17 / 1.58 | |
Engine Wheelbase (ft / m) | 5.17 / 1.58 | |
Ratio of driving wheelbase to overall engine wheelbase | 1 | |
Overall Wheelbase (engine & tender) (ft / m) | 5.17 / 1.58 | 5.17 / 1.58 |
Axle Loading (Maximum Weight per Axle) (lbs / kg) | ||
Weight on Drivers (lbs / kg) | 22,400 / 10,160 | |
Engine Weight (lbs / kg) | 22,400 / 10,160 | |
Tender Loaded Weight (lbs / kg) | ||
Total Engine and Tender Weight (lbs / kg) | ||
Tender Water Capacity (gals / ML) | ||
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | ||
Minimum weight of rail (calculated) (lb/yd / kg/m) | 19 / 9.50 | |
Geometry Relating to Tractive Effort | ||
Driver Diameter (in / mm) | 36 / 914 | 30 / 762 |
Boiler Pressure (psi / kPa) | 130 / 900 | 130 / 900 |
High Pressure Cylinders (dia x stroke) (in / mm) | 12" x 20" / 305x508 | 8.5" x 15" / 216x381 |
Tractive Effort (lbs / kg) | 8840 / 4009.76 | 3992 / 1810.74 |
Factor of Adhesion (Weight on Drivers/Tractive Effort) | 5.61 | |
Heating Ability | ||
Tubes (number - dia) (in / mm) | 100 - 2" / 51 | |
Flues (number - dia) (in / mm) | ||
Flue/Tube length (ft / m) | ||
Firebox Area (sq ft / m2) | ||
Grate Area (sq ft / m2) | 7.50 / 0.70 | 5 / 0.46 |
Evaporative Heating Surface (sq ft / m2) | 233 / 21.65 | |
Superheating Surface (sq ft / m2) | ||
Combined Heating Surface (sq ft / m2) | 233 / 21.65 | |
Evaporative Heating Surface/Cylinder Volume | 236.51 | |
Computations Relating to Power Output (More Information) | ||
Robert LeMassena's Power Computation | 975 | 650 |
Same as above plus superheater percentage | 975 | 650 |
Same as above but substitute firebox area for grate area | ||
Power L1 | ||
Power MT |