Norwich & Brandon 4-2-0 Locomotives in Great_Britain
Class Details by Steve Llanso of Sweat House Media
]
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 16094 |
| Railroad | Norwich & Brandon |
| Country | Great Britain |
| Whyte | 4-2-0 |
| Number in Class | 3 |
| Road Numbers | |
| Gauge | Std |
| Number Built | 3 |
| Builder | Tayleur |
| Year | 1845 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | |
| Engine Wheelbase (ft / m) | 12 / 3.66 |
| Ratio of driving wheelbase to overall engine wheelbase | |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | |
| Engine Weight (lbs / kg) | |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 1200 / 4.55 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 72 / 1829 |
| Boiler Pressure (psi / kPa) | 100 / 690 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 15" x 24" / 381x610 |
| Tractive Effort (lbs / kg) | 6375 / 2891.65 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | |
| Firebox Area (sq ft / m2) | |
| Grate Area (sq ft / m2) | 9.50 / 0.88 |
| Evaporative Heating Surface (sq ft / m2) | 900 / 83.61 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 900 / 83.61 |
| Evaporative Heating Surface/Cylinder Volume | 183.35 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 950 |
| Same as above plus superheater percentage | 950 |
| Same as above but substitute firebox area for grate area | |
| Power L1 | |
| Power MT | |