Strade Ferrate Romane 0-4-0 Locomotives in Italy
Class Details by Steve Llanso of Sweat House Media
Class 1001 (Locobase 6282)
Data from users.libero.it/allesandro.tuzza/fonti/sfr/1879sfrindice.htm (8 July 2004), an 1878 album of locomotives for the SFR reproduced by Allesandro Tuzza. (later cite: [
], Tavola 52.)
Small tank engine, probably for switching use, from a very little known builder. Still, the concern had assigned 92 works numbers before this one. One of those went to India and is preserved in the National Rail Museum as one of the very first steam locomotives in that country.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 1001 |
| Locobase ID | 6282 |
| Railroad | Strade Ferrate Romane (SFR) |
| Country | Italy |
| Whyte | 0-4-0T |
| Number in Class | 1 |
| Road Numbers | 1001 |
| Gauge | Std |
| Number Built | 1 |
| Builder | A Anjubault |
| Year | 1863 |
| Valve Gear | Gooch |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | |
| Engine Wheelbase (ft / m) | |
| Ratio of driving wheelbase to overall engine wheelbase | |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | 20,283 / 9200 |
| Weight on Drivers (lbs / kg) | 39,352 / 17,850 |
| Engine Weight (lbs / kg) | 39,352 / 17,850 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 528 / 2 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 33 / 16.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 34.60 / 880 |
| Boiler Pressure (psi / kPa) | 72.50 / 500 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 11" x 17.4" / 280x442 |
| Tractive Effort (lbs / kg) | 3750 / 1700.97 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 10.49 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 125 - 1.535" / 39 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 6.36 / 1.94 |
| Firebox Area (sq ft / m2) | 47.56 / 4.42 |
| Grate Area (sq ft / m2) | 5.81 / 0.54 |
| Evaporative Heating Surface (sq ft / m2) | 334 / 31.06 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 334 / 31.06 |
| Evaporative Heating Surface/Cylinder Volume | 174.52 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 421 |
| Same as above plus superheater percentage | 421 |
| Same as above but substitute firebox area for grate area | 3448 |
| Power L1 | 1249 |
| Power MT | 139.95 |