Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Vol 66, pp. 146. Works number was 52169 in August 1919.
This wood-burning saddle tank was used for switching at the town of the northern coast of Peru. The railway itself had 25 miles (40.25 km) of track and a pier that ran 2,000 feet (610 metres).
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | Chiclayo |
| Locobase ID | 15084 |
| Railroad | Compania de Ferrocarril y Muelle de Pimentel |
| Country | Peru |
| Whyte | 0-4-2ST |
| Number in Class | 1 |
| Road Numbers | 5 |
| Gauge | 3' |
| Number Built | 1 |
| Builder | Baldwin |
| Year | 1919 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 4 / 1.22 |
| Engine Wheelbase (ft / m) | 10.33 / 3.15 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.39 |
| Overall Wheelbase (engine & tender) (ft / m) | 10.33 / 3.15 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 25,300 / 11,476 |
| Engine Weight (lbs / kg) | 31,000 / 14,061 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | 31,000 / 14,061 |
| Tender Water Capacity (gals / ML) | 400 / 1.52 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 21 / 10.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 28 / 711 |
| Boiler Pressure (psi / kPa) | 160 / 1100 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 9" x 14" / 229x356 |
| Tractive Effort (lbs / kg) | 5508 / 2498.39 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.59 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 74 - 1.5" / 38 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 6.71 / 2.05 |
| Firebox Area (sq ft / m2) | 31.50 / 2.93 |
| Grate Area (sq ft / m2) | 8.20 / 0.76 |
| Evaporative Heating Surface (sq ft / m2) | 225 / 20.90 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 225 / 20.90 |
| Evaporative Heating Surface/Cylinder Volume | 218.27 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1312 |
| Same as above plus superheater percentage | 1312 |
| Same as above but substitute firebox area for grate area | 5040 |
| Power L1 | 2771 |
| Power MT | 482.93 |