Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University Vol 10a, p. 215.
Originally to be called Kalamanui, this little tank was renamed in Philadelphia. Kinaut was sold to the Kahului Railroad in September 1884 and renumbered 2.
Some time later, the Kinau gave up one of its trailing trucks in favor of a six-wheel tender, thus becoming an 0-4-2.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | Kinau |
| Locobase ID | 11788 |
| Railroad | Hawaiian |
| Country | Hawaiian Kingdom |
| Whyte | 0-4-4T |
| Number in Class | 1 |
| Road Numbers | 1 |
| Gauge | 3' |
| Number Built | 1 |
| Builder | Burnham, Parry, Williams & Co |
| Year | 1881 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 4 / 1.22 |
| Engine Wheelbase (ft / m) | 14.33 / 4.37 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.28 |
| Overall Wheelbase (engine & tender) (ft / m) | 14.33 / 4.37 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 16,000 / 7257 |
| Engine Weight (lbs / kg) | 23,000 / 10,433 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 400 / 1.52 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 13 / 6.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 30 / 762 |
| Boiler Pressure (psi / kPa) | 130 / 900 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 9" x 14" / 229x356 |
| Tractive Effort (lbs / kg) | 4177 / 1894.66 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.83 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 56 - 1.75" / 44 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 6.65 / 2.03 |
| Firebox Area (sq ft / m2) | 27 / 2.51 |
| Grate Area (sq ft / m2) | 6.70 / 0.62 |
| Evaporative Heating Surface (sq ft / m2) | 197 / 18.31 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 197 / 18.31 |
| Evaporative Heating Surface/Cylinder Volume | 191.26 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 871 |
| Same as above plus superheater percentage | 871 |
| Same as above but substitute firebox area for grate area | 3510 |
| Power L1 | 2095 |
| Power MT | 577.33 |