Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University Volume 27, p 283. Works number was 25710 in May 1905.
Castle & Cooke's Ewa Plantation received this typical sugar saddle tank through W G Irwin, a well-known broker. The engine's remit was challenging: It had to scale grades of between 2 1/2 and 3% and negotiate curves between 16 and 26 degrees radius, sometimes in an S layout. The cane cars weighed between 2,800 and 3,000 lb empty (1,270-1,361 kg) and carried 3 1/2 to 5 tons when loaded.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 6 |
| Locobase ID | 12795 |
| Railroad | Ewa Plantation Company |
| Country | USA |
| Whyte | 0-6-2ST |
| Number in Class | 1 |
| Road Numbers | 6 |
| Gauge | 2'6" |
| Number Built | 1 |
| Builder | Burnham, Williams & Co |
| Year | 1905 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 7 / 2.13 |
| Engine Wheelbase (ft / m) | 13 / 3.96 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.54 |
| Overall Wheelbase (engine & tender) (ft / m) | 13 / 3.96 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 36,000 / 16,329 |
| Engine Weight (lbs / kg) | 42,000 / 19,051 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 500 / 1.89 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 20 / 10 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 33 / 838 |
| Boiler Pressure (psi / kPa) | 160 / 1100 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 11" x 16" / 279x406 |
| Tractive Effort (lbs / kg) | 7979 / 3619.22 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.51 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 66 - 1.75" / 44 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 10 / 3.05 |
| Firebox Area (sq ft / m2) | 35.73 / 3.32 |
| Grate Area (sq ft / m2) | 7.38 / 0.69 |
| Evaporative Heating Surface (sq ft / m2) | 336 / 31.22 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 336 / 31.22 |
| Evaporative Heating Surface/Cylinder Volume | 190.91 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1181 |
| Same as above plus superheater percentage | 1181 |
| Same as above but substitute firebox area for grate area | 5717 |
| Power L1 | 2573 |
| Power MT | 472.71 |