Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University Volume 28, p. 269. (Thanks to "Matt M" for his 21 April 2021 email reporting the #4's later owner.) Works number was 29615 in November 1906.
Locobase presents the specifications of this engine as delivered, but the D A Nease did not long remain a Mogul. In 1907, its owners -- Black Band Coal & Coke Company -- had locomotive rebuilder/reseller Hicks rebuild the engine as a 2-8-0 Consolidation with 18" cylinders. At the time, the K&CR operated 20 miles of track.
Matt M (as he signed his email) said the the K&CR sold the
Principal Dimensions by Steve Llanso of Middle Run Media | |
---|---|
Class | D A Nease |
Locobase ID | 12942 |
Railroad | Kanawha & Coal River |
Country | USA |
Whyte | 2-6-0 |
Number in Class | 1 |
Road Numbers | 4 |
Gauge | Std |
Number Built | 1 |
Builder | Burnham, Williams & Co |
Year | 1906 |
Valve Gear | Stephenson |
Locomotive Length and Weight | |
Driver Wheelbase (ft / m) | 12 / 3.66 |
Engine Wheelbase (ft / m) | 20.25 / 6.17 |
Ratio of driving wheelbase to overall engine wheelbase | 0.59 |
Overall Wheelbase (engine & tender) (ft / m) | |
Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
Weight on Drivers (lbs / kg) | 105,000 / 47,627 |
Engine Weight (lbs / kg) | 121,000 / 54,885 |
Tender Loaded Weight (lbs / kg) | 80,000 / 36,287 |
Total Engine and Tender Weight (lbs / kg) | 201,000 / 91,172 |
Tender Water Capacity (gals / ML) | 4200 / 15.91 |
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
Minimum weight of rail (calculated) (lb/yd / kg/m) | 58 / 29 |
Geometry Relating to Tractive Effort | |
Driver Diameter (in / mm) | 50 / 1270 |
Boiler Pressure (psi / kPa) | 180 / 1240 |
High Pressure Cylinders (dia x stroke) (in / mm) | 19" x 24" / 483x610 |
Tractive Effort (lbs / kg) | 26,512 / 12025.66 |
Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.96 |
Heating Ability | |
Tubes (number - dia) (in / mm) | 246 - 2" / 51 |
Flues (number - dia) (in / mm) | |
Flue/Tube length (ft / m) | 11.50 / 3.51 |
Firebox Area (sq ft / m2) | 148 / 13.75 |
Grate Area (sq ft / m2) | 22.70 / 2.11 |
Evaporative Heating Surface (sq ft / m2) | 1618 / 150.37 |
Superheating Surface (sq ft / m2) | |
Combined Heating Surface (sq ft / m2) | 1618 / 150.37 |
Evaporative Heating Surface/Cylinder Volume | 205.33 |
Computations Relating to Power Output (More Information) | |
Robert LeMassena's Power Computation | 4086 |
Same as above plus superheater percentage | 4086 |
Same as above but substitute firebox area for grate area | 26,640 |
Power L1 | 4489 |
Power MT | 282.76 |