Data from A E Durrant, Locomotives of Eastern Europe (New York: Augustus M Kelley, Publishers, 1966), pp 45, 49. Works numbers were 6230-6239 1911, 6639-6648 in 1912.
Data from A[nthony] E[dward] Durrant, Locomotives of Eastern Europe (New York: Augustus M Kelley, Publishers, 1966), pp 44, 49; with data double-checked on the First Romanian railway club [] -- visited 14 January 2004--link no longer active).
These were typical all-adhesion goods locomotives suitable for relatively light or local traffic.
One of a series of Polish industrial locomotives built after World War II. Rated at 400 hp, it reached 40 kmh (25 mph).
Data from Phillipe Quiot on the website [].
These are part of the export production of this class. Quiot could find nothing more about this small batch.
| Principal Dimensions by Steve Llanso of Middle Run Media | |||
|---|---|---|---|
| Class | 46-65 | 688-743 | Ferrum |
| Locobase ID | 1504 | 1505 | 4781 |
| Railroad | Caile Ferate Romane (CFR) | Caile Ferate Romane (CFR) | Caile Ferate Romane (CFR) |
| Country | Romania | Romania | Romania |
| Whyte | 0-6-0T | 0-6-0 | 0-6-0T |
| Number in Class | 20 | 55 | 3 |
| Road Numbers | 46-65 | 688-743 | |
| Gauge | Std | Std | Std |
| Number Built | 20 | 55 | 3 |
| Builder | Hanomag | Chrzanow | |
| Year | 1911 | 1899 | 1947 |
| Valve Gear | Walschaert | ||
| Locomotive Length and Weight | |||
| Driver Wheelbase (ft / m) | 11.15 / 3.40 | ||
| Engine Wheelbase (ft / m) | 11.15 / 3.40 | ||
| Ratio of driving wheelbase to overall engine wheelbase | 1 | ||
| Overall Wheelbase (engine & tender) (ft / m) | |||
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | 33,152 / 15,038 | ||
| Weight on Drivers (lbs / kg) | 105,728 / 47,957 | 99,456 / 45,113 | |
| Engine Weight (lbs / kg) | 105,728 / 47,957 | 99,456 / 45,113 | |
| Tender Loaded Weight (lbs / kg) | |||
| Total Engine and Tender Weight (lbs / kg) | |||
| Tender Water Capacity (gals / ML) | 1320 / 5 | ||
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 2.80 / 3 | ||
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 59 / 29.50 | 55 / 27.50 | |
| Geometry Relating to Tractive Effort | |||
| Driver Diameter (in / mm) | 44.90 / 1140 | 52.40 / 1331 | 45.30 / 1151 |
| Boiler Pressure (psi / kPa) | 188.50 / 1300 | 174 / 1200 | 188.50 / 1300 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 17.1" x 21.7" / 434x551 | 16.9" x 24.8" / 429x630 | 18.11" x 21.26" / 460x540 |
| Tractive Effort (lbs / kg) | 22,643 / 10270.70 | 19,992 / 9068.23 | 24,662 / 11186.51 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.67 | 4.03 | |
| Heating Ability | |||
| Tubes (number - dia) (in / mm) | |||
| Flues (number - dia) (in / mm) | |||
| Flue/Tube length (ft / m) | |||
| Firebox Area (sq ft / m2) | |||
| Grate Area (sq ft / m2) | 17.20 / 1.60 | 17.60 / 1.64 | 18.29 / 1.70 |
| Evaporative Heating Surface (sq ft / m2) | 950 / 88.29 | 1358 / 126.21 | 1076 / 100 |
| Superheating Surface (sq ft / m2) | |||
| Combined Heating Surface (sq ft / m2) | 950 / 88.29 | 1358 / 126.21 | 1076 / 100 |
| Evaporative Heating Surface/Cylinder Volume | 164.70 | 210.91 | 169.76 |
| Computations Relating to Power Output (More Information) | |||
| Robert LeMassena's Power Computation | 3242 | 3062 | 3448 |
| Same as above plus superheater percentage | 3242 | 3062 | 3448 |
| Same as above but substitute firebox area for grate area | |||
| Power L1 | |||
| Power MT | |||