Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 49, pp. 141. Works numbers were 41161-41162 in January 1914.
This engine was ordered jointly by the Bresilien and the Sociedade Constructora Braziliera (Messrs Pimenta, Alencar, Saboia & Co).
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 3 |
| Locobase ID | 14205 |
| Railroad | Federaux de l'est Bresilien |
| Country | Brazil |
| Whyte | 2-4-0 |
| Number in Class | 2 |
| Road Numbers | 3-4 |
| Gauge | Metre |
| Number Built | 2 |
| Builder | Baldwin |
| Year | 1914 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 7 / 2.13 |
| Engine Wheelbase (ft / m) | 14 / 4.27 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.50 |
| Overall Wheelbase (engine & tender) (ft / m) | 36.21 / 11.04 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 52,000 / 23,587 |
| Engine Weight (lbs / kg) | 60,000 / 27,216 |
| Tender Loaded Weight (lbs / kg) | 44,000 / 19,958 |
| Total Engine and Tender Weight (lbs / kg) | 104,000 / 47,174 |
| Tender Water Capacity (gals / ML) | 2200 / 8.33 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 43 / 21.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 42 / 1067 |
| Boiler Pressure (psi / kPa) | 160 / 1100 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 13" x 18" / 330x457 |
| Tractive Effort (lbs / kg) | 9850 / 4467.89 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 5.28 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 132 - 2" / 51 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 8.83 / 2.69 |
| Firebox Area (sq ft / m2) | 66 / 6.13 |
| Grate Area (sq ft / m2) | 10.20 / 0.95 |
| Evaporative Heating Surface (sq ft / m2) | 671 / 62.34 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 671 / 62.34 |
| Evaporative Heating Surface/Cylinder Volume | 242.65 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1632 |
| Same as above plus superheater percentage | 1632 |
| Same as above but substitute firebox area for grate area | 10,560 |
| Power L1 | 4054 |
| Power MT | 343.75 |