Data from 1912 Railway Gazette of 7 December 1912. Boiler pressure is an estimate.
These "Prairie Tanks" had the same boiler and grate dimensions as the Nasmyth Wilson Eight-wheelers supplied at the same time.
(Others say there's no such thing as a Prairie tank because the reason for using a trailing axle in a tank engine is utterly different from its purpose in a 2-6-2 tender engine.)
The design has one more axle than either the 4-4-0 or the 2-6-0 operated by the CGR at the same time.. Its increased adhesion was a plus, one imagines, but it had a relatively small tank and bunker.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 6693 |
| Railroad | Cyprus Government Railway |
| Country | Cyprus |
| Whyte | 2-6-2T |
| Number in Class | 2 |
| Road Numbers | |
| Gauge | 2'6" |
| Number Built | 2 |
| Builder | Nasmyth Wilson |
| Year | 1904 |
| Valve Gear | Walschaert |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | |
| Engine Wheelbase (ft / m) | |
| Ratio of driving wheelbase to overall engine wheelbase | |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 28,672 / 13,005 |
| Engine Weight (lbs / kg) | 44,800 / 20,321 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 540 / 2.05 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 16 / 8 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 27.50 / 699 |
| Boiler Pressure (psi / kPa) | 142.10 / 980 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 10" x 15" / 254x381 |
| Tractive Effort (lbs / kg) | 6588 / 2988.27 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.35 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | |
| Firebox Area (sq ft / m2) | |
| Grate Area (sq ft / m2) | 6.05 / 0.56 |
| Evaporative Heating Surface (sq ft / m2) | 368 / 34.20 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 368 / 34.20 |
| Evaporative Heating Surface/Cylinder Volume | 269.89 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 860 |
| Same as above plus superheater percentage | 860 |
| Same as above but substitute firebox area for grate area | |
| Power L1 | |
| Power MT | |