Data from [] . See Indra Krishnamurti at [] for building dates and numbers both of predecessor railways and the Indonesian State Railways. His tables show that two class of 0-8-0 tank locomotives were later designated C10 by the State railways. Engines 301-306 of the Samarang-Joana Stoomtram Mij (Hartmann, 1913) and 201-205 of the Serajoedal Stoomtram Mij (Hartmann, 1914 and 1915 (205)) were combined as a single class, suggesting that they were nearly identical.
Data from dspace.dial.pipex.com/javatour/ambarawa/locos/D1505.htm, a site for the Ambarawa Railway Museum maintained by Rob Dickinson. Dickinson notes that this used the Klien Lindner lateral-axle movement system.
See Indra Krishnamurti at [] for building dates and numbers both of predecessor railways and the Indonesian State Railways.
| Principal Dimensions by Steve Llanso of Middle Run Media | ||
|---|---|---|
| Class | D10 | D15 |
| Locobase ID | 4747 | 4751 |
| Railroad | Samarang-Joana Stoomtram Mij | Samarang-Joana Stoomtram Mij |
| Country | Indonesia | Indonesia |
| Whyte | 0-8-0T | 0-8-0T |
| Number in Class | 5 | |
| Road Numbers | 307-311/D1501-1505 | |
| Gauge | 3'6" | 3'6" |
| Number Built | 5 | |
| Builder | Hartmann | Hanomag |
| Year | 1913 | 1931 |
| Valve Gear | ||
| Locomotive Length and Weight | ||
| Driver Wheelbase (ft / m) | ||
| Engine Wheelbase (ft / m) | ||
| Ratio of driving wheelbase to overall engine wheelbase | ||
| Overall Wheelbase (engine & tender) (ft / m) | ||
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | ||
| Weight on Drivers (lbs / kg) | 66,139 / 30,000 | 66,139 / 30,000 |
| Engine Weight (lbs / kg) | 66,139 / 30,000 | 66,139 / 30,000 |
| Tender Loaded Weight (lbs / kg) | ||
| Total Engine and Tender Weight (lbs / kg) | ||
| Tender Water Capacity (gals / ML) | ||
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | ||
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 28 / 14 | 28 / 14 |
| Geometry Relating to Tractive Effort | ||
| Driver Diameter (in / mm) | 33.50 / 850 | 34.30 / 870 |
| Boiler Pressure (psi / kPa) | 171.10 / 1180 | 171.10 / 1180 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 14.96" x 15.75" / 380x400 | 14.96" x 15.75" / 380x400 |
| Tractive Effort (lbs / kg) | 15,303 / 6941.33 | 14,946 / 6779.40 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.32 | 4.43 |
| Heating Ability | ||
| Tubes (number - dia) (in / mm) | ||
| Flues (number - dia) (in / mm) | ||
| Flue/Tube length (ft / m) | ||
| Firebox Area (sq ft / m2) | ||
| Grate Area (sq ft / m2) | 12.91 / 1.20 | 12.91 / 1.20 |
| Evaporative Heating Surface (sq ft / m2) | 454 / 42.20 | 431 / 40.10 |
| Superheating Surface (sq ft / m2) | 143 / 13.30 | 178 / 16.50 |
| Combined Heating Surface (sq ft / m2) | 597 / 55.50 | 609 / 56.60 |
| Evaporative Heating Surface/Cylinder Volume | 141.69 | 134.51 |
| Computations Relating to Power Output (More Information) | ||
| Robert LeMassena's Power Computation | 2209 | 2209 |
| Same as above plus superheater percentage | 2739 | 2849 |
| Same as above but substitute firebox area for grate area | ||
| Power L1 | ||
| Power MT | ||