Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 49, pp. 143. Works numbers were 40443-40444 in August 1913.
Although each of these two Moguls had an additional axle, they were in fact smaller and less powerful than the 0-4-2T tanks described in Locobase 14204.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | = |
| Locobase ID | 14206 |
| Railroad | Sao Luiz a Caxias |
| Country | Brazil |
| Whyte | 2-6-0 |
| Number in Class | 2 |
| Road Numbers | |
| Gauge | Metre |
| Number Built | 2 |
| Builder | Baldwin |
| Year | 1913 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 10.33 / 3.15 |
| Engine Wheelbase (ft / m) | 16.17 / 4.93 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.64 |
| Overall Wheelbase (engine & tender) (ft / m) | 35.75 / 10.90 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 30,000 / 13,608 |
| Engine Weight (lbs / kg) | 35,500 / 16,103 |
| Tender Loaded Weight (lbs / kg) | 28,000 / 12,701 |
| Total Engine and Tender Weight (lbs / kg) | 63,500 / 28,804 |
| Tender Water Capacity (gals / ML) | 1400 / 5.30 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 3 / 3 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 17 / 8.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 37 / 940 |
| Boiler Pressure (psi / kPa) | 160 / 1100 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 10" x 16" / 254x406 |
| Tractive Effort (lbs / kg) | 5881 / 2667.58 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 5.10 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 78 - 1.75" / 44 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 7.58 / 2.31 |
| Firebox Area (sq ft / m2) | 37 / 3.44 |
| Grate Area (sq ft / m2) | 7.30 / 0.68 |
| Evaporative Heating Surface (sq ft / m2) | 304 / 28.24 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 304 / 28.24 |
| Evaporative Heating Surface/Cylinder Volume | 209.02 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1168 |
| Same as above plus superheater percentage | 1168 |
| Same as above but substitute firebox area for grate area | 5920 |
| Power L1 | 3317 |
| Power MT | 731.27 |