Data from Record of Recent Construction #54 (Baldwin Locomotive Works, 1905), p. 30-31; and DeGolyer, Volume 39, pp. 250+. Works numbers were 35777-35778 in December 1910 and 37476-37479, 37498-37500 in January 1912.
These Consolidations were called upon to ride on 25-kg/metre (50-lb/yard) rail, negotiate curve radii as tight as 266 ft (81 metres) and clear an 8-ft (2.44-m) loading gauge 33" (0.84 m) off the rail. Mogyana specified that the main rods drive the third adhesion axle. Inevitably, it seems, the design earned the stipulation "frames to be made heavier." ("Heavier than ..." may mean than the stock metre-gauge 2-8-0. It's a common request in Baldwin specs for locomotives destined to run on relatively poor tracks.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 140 |
| Locobase ID | 13778 |
| Railroad | Mogiana |
| Country | Brazil |
| Whyte | 2-8-0 |
| Number in Class | 9 |
| Road Numbers | 140-141, 164-170 |
| Gauge | Metre |
| Number Built | 9 |
| Builder | Baldwin |
| Year | 1911 |
| Valve Gear | Walschaert |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 12.67 / 3.86 |
| Engine Wheelbase (ft / m) | 19.92 / 6.07 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.64 |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 85,000 / 38,555 |
| Engine Weight (lbs / kg) | 100,000 / 45,359 |
| Tender Loaded Weight (lbs / kg) | 50,000 / 22,680 |
| Total Engine and Tender Weight (lbs / kg) | 150,000 / 68,039 |
| Tender Water Capacity (gals / ML) | 2400 / 9.09 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 35 / 17.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 42 / 1067 |
| Boiler Pressure (psi / kPa) | 160 / 1100 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 17.5" x 22" / 445x559 |
| Tractive Effort (lbs / kg) | 21,817 / 9896.04 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.90 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 200 - 2" / 51 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 11.83 / 3.61 |
| Firebox Area (sq ft / m2) | 114 / 10.59 |
| Grate Area (sq ft / m2) | 18 / 1.67 |
| Evaporative Heating Surface (sq ft / m2) | 1341 / 124.58 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1341 / 124.58 |
| Evaporative Heating Surface/Cylinder Volume | 218.95 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 2880 |
| Same as above plus superheater percentage | 2880 |
| Same as above but substitute firebox area for grate area | 18,240 |
| Power L1 | 3495 |
| Power MT | 362.60 |