Data from "Compound Articulated Locomotive, Brazil Railway", Locomotive Magazine, Volume 19 (15 September 1913) , p. 207. See also "Locomotivas Henschel & Sohn G.m.b.H v Kassel
Locomotiva 2-6-0 + 6-2-0 da VFRGS* Viatpo FTrrea do Rio Grande do Sul", at the Centro Oeste Brasil website at [], last accessed 14 August 2016. Works numbers were 20356-20365 in 1913.
The data indicate that these Mallets were indeed delivered as saturated-boiler locomotives, although they may have added superheaters later.
Data from illustration at narrowmind.railfan.net. See also DeGolyer, Vol 72, pp. 128+. The complete list of Baldwin works numbers created by Connelly and supplied by Allen Stanley in July 2007 from his extensive Rail Data Exchange gives the works numbers as 58160-58161.
Meter Prairie Mallets that differed from most in being built as simple-expansion locomotives. The boiler's relatively small size in relation to the cylinders and the large grate suggest that this was primarily a helper engine and that it used relatively low-calorie coal. Firebox heating surface included 17 sq ft (1.6 sq m) of arch tubes. All four cylinders were served by 8" (203 mm) piston valves.
| Principal Dimensions by Steve Llanso of Middle Run Media | ||
|---|---|---|
| Class | 621 | 631 |
| Locobase ID | 20094 | 4432 |
| Railroad | Rio Grande do Sul | Rio Grande do Sul |
| Country | Brazil | Brazil |
| Whyte | 2-6-6-2 | 2-6-6-2 |
| Number in Class | 4 | 2 |
| Road Numbers | 621-630 | 631-632 |
| Gauge | Metre | metre |
| Number Built | 4 | 2 |
| Builder | Henschel & Sohn | Baldwin |
| Year | 1913 | 1924 |
| Valve Gear | Walschaert | Walschaert |
| Locomotive Length and Weight | ||
| Driver Wheelbase (ft / m) | 8.04 / 2.45 | 7.50 / 2.29 |
| Engine Wheelbase (ft / m) | 36.09 / 11 | 35.75 / 10.90 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.22 | 0.21 |
| Overall Wheelbase (engine & tender) (ft / m) | 63.16 / 19.25 | 60.62 / 18.48 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | ||
| Weight on Drivers (lbs / kg) | 134,173 / 60,860 | 132,540 / 60,119 |
| Engine Weight (lbs / kg) | 159,493 / 72,345 | 166,590 / 75,564 |
| Tender Loaded Weight (lbs / kg) | 105,822 / 48,000 | 104,000 / 47,174 |
| Total Engine and Tender Weight (lbs / kg) | 265,315 / 120,345 | 270,590 / 122,738 |
| Tender Water Capacity (gals / ML) | 4000 / 15.15 | |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 5 / 5 | 16.50 / 15 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 37 / 18.50 | 37 / 18.50 |
| Geometry Relating to Tractive Effort | ||
| Driver Diameter (in / mm) | 42 / 1067 | 42 / 1067 |
| Boiler Pressure (psi / kPa) | 200.20 / 1380 | 170 / 1170 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 15.98" x 20" / 406x508 | 16" x 22" / 406x559 (4) |
| Low Pressure Cylinders (dia x stroke) (in / mm) | 25" x 20" / 635x508 | |
| Tractive Effort (lbs / kg) | 29,381 / 13327.01 | 38,754 / 17578.54 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.57 | 3.42 |
| Heating Ability | ||
| Tubes (number - dia) (in / mm) | 200 - 2.008" / 51 | 121 - 2" / 51 |
| Flues (number - dia) (in / mm) | 24 - 5.375" / 137 | |
| Flue/Tube length (ft / m) | 17.06 / 5.20 | 16 / 4.88 |
| Firebox Area (sq ft / m2) | 109.79 / 10.20 | 165 / 15.33 |
| Grate Area (sq ft / m2) | 53.82 / 5 | 53.70 / 4.99 |
| Evaporative Heating Surface (sq ft / m2) | 1881 / 174.75 | 1711 / 158.96 |
| Superheating Surface (sq ft / m2) | 432 / 40.13 | |
| Combined Heating Surface (sq ft / m2) | 1881 / 174.75 | 2143 / 199.09 |
| Evaporative Heating Surface/Cylinder Volume | 405.16 | 167.10 |
| Computations Relating to Power Output (More Information) | ||
| Robert LeMassena's Power Computation | 10,775 | 9129 |
| Same as above plus superheater percentage | 10,775 | 10,955 |
| Same as above but substitute firebox area for grate area | 21,980 | 33,660 |
| Power L1 | 2997 | 7466 |
| Power MT | 295.47 | 745.12 |