Data from SACM diagram Nr. 110 from Societe Alsacienne de Constructions Mecaniques from locomotive book supplied by Dany Machi up at [] as
Diagrammes des machines SACM construites a GRAFENSTADEN (October 2007).
Tube diameter is the interior measurement.
Locobase is working only from the diagram and the database, but everything about this locomotive suggests Bourbonnais, the widely produced six-coupled that would be built in the hundreds. Two key similarities are the cylinder volume and the wheelbase, which are identical to a PLM class shown in Locobase 599. Several other important dimensions and weights are almost the same.
The Bourges a Gien ran north-south about 160 km (100 miles) east of Tours. A well-known viaduct was built across the Loire at Gien in 1888-1893. This locomotive likely was delivered in the 1870s.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 15514 |
| Railroad | Bourges-Gien |
| Country | France |
| Whyte | 0-6-0 |
| Number in Class | |
| Road Numbers | |
| Gauge | Std |
| Number Built | |
| Builder | SACM |
| Year | |
| Valve Gear | Walschaert |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 11.22 / 3.42 |
| Engine Wheelbase (ft / m) | 11.22 / 3.42 |
| Ratio of driving wheelbase to overall engine wheelbase | 1 |
| Overall Wheelbase (engine & tender) (ft / m) | 33.41 / 10.18 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 76,809 / 34,840 |
| Engine Weight (lbs / kg) | 76,809 / 34,840 |
| Tender Loaded Weight (lbs / kg) | 43,211 / 19,600 |
| Total Engine and Tender Weight (lbs / kg) | 120,020 / 54,440 |
| Tender Water Capacity (gals / ML) | 1848 / 7 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 3.30 / 3 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 43 / 21.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 55.10 / 1400 |
| Boiler Pressure (psi / kPa) | 130.50 / 900 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 17.72" x 25.59" / 450x650 |
| Tractive Effort (lbs / kg) | 16,176 / 7337.32 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.75 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 177 - 1.811" / 46 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 14.07 / 4.29 |
| Firebox Area (sq ft / m2) | 79.01 / 7.34 |
| Grate Area (sq ft / m2) | 14.85 / 1.38 |
| Evaporative Heating Surface (sq ft / m2) | 1258 / 116.84 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1258 / 116.84 |
| Evaporative Heating Surface/Cylinder Volume | 172.23 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1938 |
| Same as above plus superheater percentage | 1938 |
| Same as above but substitute firebox area for grate area | 10,311 |
| Power L1 | 2712 |
| Power MT | 233.52 |