Data from SACM diagram Nr. 38 from Societe Alsacienne de Constructions Mecaniques from locomotive book supplied by Dany Machi up at [] as
Diagrammes des machines SACM construites a GRAFENSTADEN (October 2007).
Tube diameter is the interior measurement. This locomotive was identical to the ABC six-coupled shown in Locobase 15523 except for a 250-mm (9.84") shorter wheelbase and slightly more weight because of a larger coal bunker. Dietrich-Mutterhouse was a meter-gauge railway in Alsace-Lorraine.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 1 |
| Locobase ID | 15526 |
| Railroad | Dietrich-Mutterhouse |
| Country | Germany |
| Whyte | 0-6-0T |
| Number in Class | 3 |
| Road Numbers | 1-3 |
| Gauge | Std |
| Number Built | 3 |
| Builder | Graffenstaden |
| Year | 1869 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 9.02 / 2.75 |
| Engine Wheelbase (ft / m) | 9.02 / 2.75 |
| Ratio of driving wheelbase to overall engine wheelbase | 1 |
| Overall Wheelbase (engine & tender) (ft / m) | 9.02 / 2.75 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 55,667 / 25,250 |
| Engine Weight (lbs / kg) | 55,667 / 25,250 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 660 / 2.50 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 1.80 / 2 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 31 / 15.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 47.20 / 1200 |
| Boiler Pressure (psi / kPa) | 116 / 800 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 14.96" x 18.11" / 380x460 |
| Tractive Effort (lbs / kg) | 8467 / 3840.57 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 6.57 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 109 - 1.969" / 50 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 9.84 / 3 |
| Firebox Area (sq ft / m2) | 53.82 / 5 |
| Grate Area (sq ft / m2) | 11.19 / 1.04 |
| Evaporative Heating Surface (sq ft / m2) | 551 / 51.20 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 551 / 51.20 |
| Evaporative Heating Surface/Cylinder Volume | 149.55 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1298 |
| Same as above plus superheater percentage | 1298 |
| Same as above but substitute firebox area for grate area | 6243 |
| Power L1 | 2031 |
| Power MT | 241.31 |