Data from SACM diagram Nr. 83 from Societe Alsacienne de Constructions Mecaniques from locomotive book supplied by Dany Machi up at [] as
Diagrammes des machines SACM construites a GRAFENSTADEN (October 2007).
NB: Locobase calculates tube and flue heating surface area using the outside (water side) diameter. When calculated using the inside (fire side) diameter of 35 mm (1.378") and direct heating surface, evaporative heating surface area measured 444 sq ft) (45.65 sq m)
Small industrial tank operated by the French company formed in the 19th Century that continued the exploitation of lead mines that were extracting ore near Athens during the Golden Age more than 2,000 years earlier.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 15534 |
| Railroad | Compagnie Francaise des Mines du Laurium |
| Country | Greece |
| Whyte | 0-6-0T |
| Number in Class | |
| Road Numbers | |
| Gauge | Std |
| Number Built | |
| Builder | SACM |
| Year | |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 7.22 / 2.20 |
| Engine Wheelbase (ft / m) | 7.22 / 2.20 |
| Ratio of driving wheelbase to overall engine wheelbase | 1 |
| Overall Wheelbase (engine & tender) (ft / m) | 7.22 / 2.20 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 50,861 / 23,070 |
| Engine Weight (lbs / kg) | 50,861 / 23,070 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 713 / 2.70 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 1.10 / 1 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 28 / 14 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 35.40 / 900 |
| Boiler Pressure (psi / kPa) | 129.30 / 880 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 13.78" x 18.11" / 350x460 |
| Tractive Effort (lbs / kg) | 10,677 / 4843.01 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.76 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 105 - 1.614" / 41 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 10.01 / 3.05 |
| Firebox Area (sq ft / m2) | 47.36 / 4.40 |
| Grate Area (sq ft / m2) | 6.78 / 0.63 |
| Evaporative Heating Surface (sq ft / m2) | 491 / 45.65 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 491 / 45.65 |
| Evaporative Heating Surface/Cylinder Volume | 157.07 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 877 |
| Same as above plus superheater percentage | 877 |
| Same as above but substitute firebox area for grate area | 6124 |
| Power L1 | 1776 |
| Power MT | 230.95 |