Data from [], last accessed 13 April 2010. Three builders contributed locomotives to this class: Maffei (18 - works 688-705 in 1869), Krauss in Munich (10 - works 49-58 in 1870), and Sigl in Wiener Neustadt (10 - 1152-1157 in 1870, 1260-1263 in 1871). (Production data from [])
These engines apparently opened the AFV, which ultimately extended for 397 km (240 miles) and included the cities of Gro+wardein, Essegg, and VillányAfter 10-15 years in service, the class went with the AFV into the Hungarian State system in 1884 and renumbered. In 1891 they were designated IIm and renumbered 1222-1259.
After World War One, 6 went over to the Romanian State Railways and the others were all retired by 1924.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 1 / IIm / 237 |
| Locobase ID | 11202 |
| Railroad | Alf~ld-Fiumei Vas+t/ Hungarian State (MAV) |
| Country | Hungary |
| Whyte | 2-4-0 |
| Number in Class | 32 |
| Road Numbers | 1-38 / 801-838 / 1222-1259 |
| Gauge | Std |
| Number Built | 32 |
| Builder | several |
| Year | 1869 |
| Valve Gear | |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | |
| Engine Wheelbase (ft / m) | 14.69 / 4.48 |
| Ratio of driving wheelbase to overall engine wheelbase | |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 48,502 / 22,000 |
| Engine Weight (lbs / kg) | 68,343 / 31,000 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 40 / 20 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 62.20 / 1580 |
| Boiler Pressure (psi / kPa) | 116 / 800 |
| High Pressure Cylinders (dia x stroke) (in / mm) | |
| Tractive Effort (lbs / kg) | |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | |
| Firebox Area (sq ft / m2) | |
| Grate Area (sq ft / m2) | 16.14 / 1.50 |
| Evaporative Heating Surface (sq ft / m2) | 1280 / 119 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1280 / 119 |
| Evaporative Heating Surface/Cylinder Volume | |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1872 |
| Same as above plus superheater percentage | 1872 |
| Same as above but substitute firebox area for grate area | |
| Power L1 | |
| Power MT | |