0-6-0 Steam Locomotives in Indonesia

Staatsspoorwegen


Class Details by Steve Llanso of Sweat House Media

Class C15 (Locobase 4727)

Data from []. . The first batch of 10 arrived from Hartmann, the second 10 came from Werkspoor.

See Indra Krishnamurti at [] for building dates and numbers both of predecessor railways and the Indonesian State Railways. See also "Locomotif C15" in Wikipedia at [] (translated by Google), last accessed 23 August 2026. Hartmann works numbers were 2313-2322 in1898. Werkspoor delivered the other ten in 1899-1900; these were the first locomotives built for the Dutch East Indies by a Dutch builder.

These 20 six-coupled cross-compound tanks arrived in the late 1890s to serve the 60.3 km (37.5 mile) Surabaya Kota-Pasuruan line that ran south down to Pasuruan. The route later was extended east along the Java coast another 125 km (77.6 miles) to Panarukar. Wikipedia explains the purpose of the project: "This route was of great importance at the time due to the presence of a massive water source and tobacco plantations in the Umbulan area."

Principal Dimensions by Steve Llanso of Middle Run Media
ClassC15
Locobase ID4727
RailroadStaatsspoorwegen
CountryIndonesia
Whyte0-6-0T
Number in Class20
Road Numbers240-259/C1501-1520
Gauge3'6"
Number Built20
Builderseveral
Year1898
Valve Gear
Locomotive Length and Weight
Driver Wheelbase (ft / m)
Engine Wheelbase (ft / m)
Ratio of driving wheelbase to overall engine wheelbase
Overall Wheelbase (engine & tender) (ft / m)
Axle Loading (Maximum Weight per Axle) (lbs / kg)
Weight on Drivers (lbs / kg)59,084 / 26,800
Engine Weight (lbs / kg)59,084 / 26,800
Tender Loaded Weight (lbs / kg)
Total Engine and Tender Weight (lbs / kg)
Tender Water Capacity (gals / ML)
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT)
Minimum weight of rail (calculated) (lb/yd / kg/m)33 / 16.50
Geometry Relating to Tractive Effort
Driver Diameter (in / mm)35.40 / 900
Boiler Pressure (psi / kPa)171.10 / 1180
High Pressure Cylinders (dia x stroke) (in / mm)12.99" x 17.72" / 330x450 (1)
Low Pressure Cylinders (dia x stroke) (in / mm)20.08" x 17.72" / 510x450 (1)
Tractive Effort (lbs / kg)8660 / 3928.11
Factor of Adhesion (Weight on Drivers/Tractive Effort) 6.82
Heating Ability
Tubes (number - dia) (in / mm)
Flues (number - dia) (in / mm)
Flue/Tube length (ft / m)
Firebox Area (sq ft / m2)
Grate Area (sq ft / m2)10.33 / 0.96
Evaporative Heating Surface (sq ft / m2)541 / 50.30
Superheating Surface (sq ft / m2)
Combined Heating Surface (sq ft / m2)541 / 50.30
Evaporative Heating Surface/Cylinder Volume398.08
Computations Relating to Power Output (More Information)
Robert LeMassena's Power Computation1767
Same as above plus superheater percentage1767
Same as above but substitute firebox area for grate area
Power L1
Power MT

All material Copyright © SteamLocomotive.com
Wes Barris