Data from [], an account published in the Vulcan Magazine for Spring 1952. Works numbers were 6006-6045 in 1952 and 6972-6995 in 1954.
This light-footed design sported relatively capacious 12" (305 mm) piston valves. These Santa Fes had a tonnage rating of 600 tonnes (720 short tons) up a 1.5% grade and 300 tonnes (330 short tons) up 2.8%. The article notes that equalization was divided into two groups: the leading truck and the first three coupled axles (the third one being the driven one) being one group, the fourth and fifth coupled and the trailing axle being the other. Both the leading and trailing trucks used Timken roller bearings.
Principal Dimensions by Steve Llanso of Sweat House Media | |
---|---|
Class | 52.1 |
Locobase ID | 4352 |
Railroad | Iranian State Railways |
Country | Iran |
Whyte | 2-10-2 |
Number in Class | 64 |
Road Numbers | 52.101-52.164 |
Gauge | Std |
Number Built | 64 |
Builder | Vulcan Foundry |
Year | 1951 |
Valve Gear | Walschaert |
Locomotive Length and Weight | |
Driver Wheelbase (ft / m) | |
Engine Wheelbase (ft / m) | |
Ratio of driving wheelbase to overall engine wheelbase | |
Overall Wheelbase (engine & tender) (ft / m) | |
Axle Loading (Maximum Weight per Axle) (lbs / kg) | 37,453 / 16,988 |
Weight on Drivers (lbs / kg) | 182,896 / 82,960 |
Engine Weight (lbs / kg) | 243,018 / 110,231 |
Tender Loaded Weight (lbs / kg) | 150,685 / 68,350 |
Total Engine and Tender Weight (lbs / kg) | 393,703 / 178,581 |
Tender Water Capacity (gals / ML) | 7920 / 30 |
Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 2375 / 8989.40 |
Minimum weight of rail (calculated) (lb/yd / kg/m) | 61 / 30.50 |
Geometry Relating to Tractive Effort | |
Driver Diameter (in / mm) | 51 / 1295 |
Boiler Pressure (psi / kPa) | 200 / 13.80 |
High Pressure Cylinders (dia x stroke) (in / mm) | 23.82" x 26" / 605x660 |
Tractive Effort (lbs / kg) | 49,174 / 22304.98 |
Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.72 |
Heating Ability | |
Tubes (number - dia) (in / mm) | 181 - 2" / 51 |
Flues (number - dia) (in / mm) | 36 - 5.5" / 140 |
Flue/Tube length (ft / m) | 17.12 / 5.22 |
Firebox Area (sq ft / m2) | 221 / 20.53 |
Grate Area (sq ft / m2) | 65.70 / 6.10 |
Evaporative Heating Surface (sq ft / m2) | 2731 / 253.72 |
Superheating Surface (sq ft / m2) | 869 / 80.73 |
Combined Heating Surface (sq ft / m2) | 3600 / 334.45 |
Evaporative Heating Surface/Cylinder Volume | 203.65 |
Computations Relating to Power Output (More Information) | |
Robert LeMassena's Power Computation | 13,140 |
Same as above plus superheater percentage | 16,294 |
Same as above but substitute firebox area for grate area | 54,808 |
Power L1 | 14,778 |
Power MT | 890.67 |