Data from December 1891 RREJ. This may be a simple-expansion variant of the numerous FS 290 class, which was built beginning in 1889. Like many European all-adhesion six-coupled goods locomotives, this engine carried its steam dome well foward.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | unknown |
| Locobase ID | 5410 |
| Railroad | Adriatico |
| Country | Italy |
| Whyte | 0-6-0 |
| Number in Class | |
| Road Numbers | |
| Gauge | Std |
| Number Built | |
| Builder | Ansaldo |
| Year | 1889 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | |
| Engine Wheelbase (ft / m) | |
| Ratio of driving wheelbase to overall engine wheelbase | |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 92,500 / 41,957 |
| Engine Weight (lbs / kg) | 92,500 / 41,957 |
| Tender Loaded Weight (lbs / kg) | 58,000 / 26,308 |
| Total Engine and Tender Weight (lbs / kg) | 150,500 / 68,265 |
| Tender Water Capacity (gals / ML) | 2400 / 9.09 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 51 / 25.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 54 / 1372 |
| Boiler Pressure (psi / kPa) | 150 / 1030 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 17.75" x 25.6" / 451x650 |
| Tractive Effort (lbs / kg) | 19,044 / 8638.22 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.86 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 185 - 2" / 51 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 13.67 / 4.17 |
| Firebox Area (sq ft / m2) | |
| Grate Area (sq ft / m2) | |
| Evaporative Heating Surface (sq ft / m2) | 1170 / 108.74 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1170 / 108.74 |
| Evaporative Heating Surface/Cylinder Volume | 159.58 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | |
| Same as above plus superheater percentage | |
| Same as above but substitute firebox area for grate area | |
| Power L1 | |
| Power MT | |