Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 30, p. 217. See also Martin Coombs, "Central American countries
steam locomotive list (other than Panama)", V 1.08 September 2024 at [], p.
(Thanks to Ivo Rutishauser for hsi 14 October 2026 email establishing the correct provenance of this locomotive.) Works number was 30453 in March 1907.
This Consolidation was originally intended for the National Railway of Nicaragua as their #2 San Miguelito. Light-footed as it had to run on 40 lb/yard (20 kg/metre) rail. Its Radley & Hunter spark-arresting stack measured 16" (406 mm) in diameter.
Baldwin's specification shows the builder sold it on 19 February 1918 to Frazar & Company as agents for the Japanese Bibai Company. The spec also describes in detail the changes that would be needed to fit the Bibai's needs. It was essentially identical to locomotives delivered in 1893 (Locobase 10934) and later designated 9040.
Martin Coombs's entry for this engine suggests he couldn't confirm that the San Miguelito actually ran on the Pacifico. Locobase finds it unlikely that Baldwin would have modified a small locomotive that had run in plantation service for 11 years. Could this locomotive sat on the stock track at Eddystone undelivered for that long?
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | San Miguelito |
| Locobase ID | 13129 |
| Railroad | FC del Pacifico de Nicargua |
| Country | Nicaragua |
| Whyte | 2-8-0 |
| Number in Class | 1 |
| Road Numbers | 2 |
| Gauge | 3'6" |
| Number Built | 1 |
| Builder | Burnham, Williams & Co |
| Year | 1907 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 12.25 / 3.73 |
| Engine Wheelbase (ft / m) | 18.92 / 5.77 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.65 |
| Overall Wheelbase (engine & tender) (ft / m) | 38.71 / 11.80 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 70,000 / 31,752 |
| Engine Weight (lbs / kg) | 80,000 / 36,287 |
| Tender Loaded Weight (lbs / kg) | 50,000 / 22,680 |
| Total Engine and Tender Weight (lbs / kg) | 130,000 / 58,967 |
| Tender Water Capacity (gals / ML) | 2500 / 9.47 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 29 / 14.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 43 / 1092 |
| Boiler Pressure (psi / kPa) | 160 / 1100 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 16" x 20" / 406x508 |
| Tractive Effort (lbs / kg) | 16,193 / 7345.03 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.32 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 154 - 2" / 51 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 11.58 / 3.53 |
| Firebox Area (sq ft / m2) | 88 / 8.18 |
| Grate Area (sq ft / m2) | 17 / 1.58 |
| Evaporative Heating Surface (sq ft / m2) | 1018 / 94.61 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 1018 / 94.61 |
| Evaporative Heating Surface/Cylinder Volume | 218.73 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 2720 |
| Same as above plus superheater percentage | 2720 |
| Same as above but substitute firebox area for grate area | 14,080 |
| Power L1 | 3592 |
| Power MT | 452.51 |