Data from [] , which has preserved 131 060.
This locomotive appears to have been based on the (Locobase 5876), but with the front truck removed.
NB: The direct heating surface (including the firebox heating surface) is an estimate calculated by subtracting the calculated tube heating surface from the reported total evaporative heating surface.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 131 |
| Locobase ID | 6466 |
| Railroad | Caile Ferate Romane (CFR) |
| Country | Romania |
| Whyte | 0-6-2T |
| Number in Class | |
| Road Numbers | |
| Gauge | Std |
| Number Built | |
| Builder | Resita |
| Year | 1942 |
| Valve Gear | Walschaert |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 9.84 / 3 |
| Engine Wheelbase (ft / m) | 26.90 / 8.20 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.37 |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | 30,424 / 13,800 |
| Weight on Drivers (lbs / kg) | |
| Engine Weight (lbs / kg) | 138,891 / 63,000 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 1848 / 7 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 4.40 / 4 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 47.20 / 1199 |
| Boiler Pressure (psi / kPa) | 203.10 / 1400 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 16.54" x 23.62" / 420x600 |
| Tractive Effort (lbs / kg) | 23,634 / 10720.21 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 60 - 2.126" / 54 |
| Flues (number - dia) (in / mm) | 20 - 5.472" / 139 |
| Flue/Tube length (ft / m) | 13.94 / 4.25 |
| Firebox Area (sq ft / m2) | 78 / 7.25 |
| Grate Area (sq ft / m2) | 24.75 / 2.30 |
| Evaporative Heating Surface (sq ft / m2) | 939 / 87.27 |
| Superheating Surface (sq ft / m2) | 355 / 32.99 |
| Combined Heating Surface (sq ft / m2) | 1294 / 120.26 |
| Evaporative Heating Surface/Cylinder Volume | 159.86 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 5027 |
| Same as above plus superheater percentage | 6384 |
| Same as above but substitute firebox area for grate area | 20,119 |
| Power L1 | 12,305 |
| Power MT | |