Data from []. Works numbers were 7151, 7154, 7165-7166, 7189 in February 1884. Baldwin Locomotive Works Specification for Engines, as digitized by the DeGolyer Library of Southern Methodist University Volume 12, p. 24.
Small, low-drivered freight locomotives sold originally to the Marquette & Ishpeming Construction Company to support the building of the M & W, which soon became the Marquette, Houghton & Ontonagon, which was then leased to the Duluth, South Shore & Atlantic in 1886 and finally purchased in 1890. (According to the Baldwin Specs page, however, the M & I CC purchase was for the Detroit, Mackinac & Marquette Railroad.)
All sold to lumber companies (Menasha Wooden Ware, Christiansen, and Thompsen Wells) in 1925-1926.
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | D |
| Locobase ID | 1325 |
| Railroad | Marquette & Western |
| Country | USA |
| Whyte | 2-6-0 |
| Number in Class | 5 |
| Road Numbers | 51-55 / 200-205 |
| Gauge | Std |
| Number Built | 5 |
| Builder | Burnham, Parry, Williams & Co |
| Year | 1884 |
| Valve Gear | |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 15.17 / 4.62 |
| Engine Wheelbase (ft / m) | 23.17 / 7.06 |
| Ratio of driving wheelbase to overall engine wheelbase | 0.65 |
| Overall Wheelbase (engine & tender) (ft / m) | |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 73,000 / 33,112 |
| Engine Weight (lbs / kg) | 87,000 / 39,463 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 2400 / 9.09 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 41 / 20.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 53 / 1346 |
| Boiler Pressure (psi / kPa) | 150 / 1030 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 18" x 24" / 457x610 |
| Tractive Effort (lbs / kg) | 18,706 / 8484.91 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 3.90 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 190 - 2" / 51 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 11.50 / 3.51 |
| Firebox Area (sq ft / m2) | |
| Grate Area (sq ft / m2) | 17.10 / 1.59 |
| Evaporative Heating Surface (sq ft / m2) | |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | |
| Evaporative Heating Surface/Cylinder Volume | |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 2565 |
| Same as above plus superheater percentage | 2565 |
| Same as above but substitute firebox area for grate area | |
| Power L1 | |
| Power MT | |