Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 66, pp. 146. See also "New York & Bermudez Company", Diccionario de Historia
de Venezuela (DHV) at [], last accessed 15 October 2026. Works numbers were 56526-56257 in May 1923.
NY&B gained a concession on 7 May 1883 from the Venezuelan governmen that granted it an exclusive concession for 25 years to extract asphalt from deposits near Lake Guanoco. DHV's account notes the location of one of the "principal natural deposits of asphalt in the world." (Locobase's translation). After research and cnstruction in 1886, Venezuela extended the concession term to 99 years.
Even then, however, neverending contention between the developers and the government had begun to boil. By 1894, the promise of improved financing would be countered by complaints that promised improvements to the rivers to accommodate ships and development of other resources. The Spanish-language account contains the tortuous details. 1908 saw a new government that said it was less interested in asphalt exploitarion and attention turned to Lake Maracaibo.
Nevertheless, the NY&B bought two new saddle-tanks from Baldwin in 1923. Given the company's expressed disinterest in the Venezuela project, it's difficult to see what the small six-coupled pair might serve..
| Principal Dimensions by Steve Llanso of Middle Run Media | |
|---|---|
| Class | 10 |
| Locobase ID | 15078 |
| Railroad | New York & Bermudez Company |
| Country | Venezuela |
| Whyte | 0-6-0ST |
| Number in Class | 2 |
| Road Numbers | 10-11 |
| Gauge | 3' |
| Number Built | 2 |
| Builder | Baldwin |
| Year | 1923 |
| Valve Gear | Stephenson |
| Locomotive Length and Weight | |
| Driver Wheelbase (ft / m) | 7.50 / 2.29 |
| Engine Wheelbase (ft / m) | 7.50 / 2.29 |
| Ratio of driving wheelbase to overall engine wheelbase | 1 |
| Overall Wheelbase (engine & tender) (ft / m) | 7.50 / 2.29 |
| Axle Loading (Maximum Weight per Axle) (lbs / kg) | |
| Weight on Drivers (lbs / kg) | 52,500 / 23,814 |
| Engine Weight (lbs / kg) | 52,500 / 23,814 |
| Tender Loaded Weight (lbs / kg) | |
| Total Engine and Tender Weight (lbs / kg) | |
| Tender Water Capacity (gals / ML) | 800 / 3.03 |
| Tender Fuel Capacity (oil/coal) (gals/tons / Liters/MT) | 1 / 1 |
| Minimum weight of rail (calculated) (lb/yd / kg/m) | 29 / 14.50 |
| Geometry Relating to Tractive Effort | |
| Driver Diameter (in / mm) | 34 / 864 |
| Boiler Pressure (psi / kPa) | 180 / 1240 |
| High Pressure Cylinders (dia x stroke) (in / mm) | 12" x 18" / 305x457 |
| Tractive Effort (lbs / kg) | 11,664 / 5290.71 |
| Factor of Adhesion (Weight on Drivers/Tractive Effort) | 4.50 |
| Heating Ability | |
| Tubes (number - dia) (in / mm) | 86 - 1.75" / 44 |
| Flues (number - dia) (in / mm) | |
| Flue/Tube length (ft / m) | 8.50 / 2.59 |
| Firebox Area (sq ft / m2) | 46 / 4.27 |
| Grate Area (sq ft / m2) | 9.10 / 0.85 |
| Evaporative Heating Surface (sq ft / m2) | 355 / 32.98 |
| Superheating Surface (sq ft / m2) | |
| Combined Heating Surface (sq ft / m2) | 355 / 32.98 |
| Evaporative Heating Surface/Cylinder Volume | 150.67 |
| Computations Relating to Power Output (More Information) | |
| Robert LeMassena's Power Computation | 1638 |
| Same as above plus superheater percentage | 1638 |
| Same as above but substitute firebox area for grate area | 8280 |
| Power L1 | 2532 |
| Power MT | 318.98 |